A:601 I/O Sizer Features

• Uses 20 HP Vickers motor pump package & efficient 6” hydraulic cylinders to deliver over 56K lbf for forming pipes up to 3” in diameter at sound level of only 74 dB
• Enables standard universal tooling for quick change over & efficient utilization of tooling
• Tooling repeatability to .001”
• Requires only 24 sq. ft.
• Integrates standard control system components based on Vickers proportional valves & Baluff linear transducers with own user-friendly operator program based on Allen Bradley SLC 503
• Facilitates maintenance with total access design & modular construction

Standard control, simple software.

The A:601 uses a standard Allen Bradley SLC 503 system. Aristo's unique structure for the program enables quick setups and greater forming results from a single setup. The sizer of choice when you're forming tubes up to 3" in diameter, the A:601 uses a 6" diameter hydraulic cylinder that delivers more than 56,000 lb. forming force. With standard universal tooling, simple-to-learn Allen Bradley control, powerful Vickers motor pump package and modular construction, it's a superior solution with a footprint of just 24 square feet.

Tooling Features:

• Universal I/O drop-in tooling for quick change convenience
• Tool ejector mechanism for easier tool removal

Control Features:

• Allen Bradley SLC 503 based system
• Memory storage for up to 12 part numbers
• Manual switches for setup operaiton
• Panelview 900 with active matrix operator terminal
• Operating and maintenance diagnostics and warnings.

Program Features:

• Unique part definition within program (part specific ZERO set) enables quicker more accurate setup
• Up to 4 hits per cycle can be programmed
• Each hit can have different values, enabling 'pre'-expand or reduce operation
• Eight standard sequences available in program

Hydraulic Features:

• 20 HP Vickers integrated motor and piston  pump rated to 3000 psi
• 6" diameter heavy duty hydraulic cylinder delivers 56,000 ibf
• Piston pumps unload at idle for less wear, better filtration, less heat build up
• Vickers proportional valves and baluff linear transducers for superior accuracy, faster response, and machine repeatability to .001"
• 100 gallon reservoir
• Sensors for low oil, temperature, and dirty filter

Machine Design:

• Oil cooled sound enclosed motor / pump for quiet (<75dB) operation
• 2½ x 7½' footprint for efficient use of floorspace
• Standard components to minimize inventory and downtime
• Easy access valves, motor / pump, oil tank
• Water cooled heat exchanger standard: Air cooled option
• Flood coolant standard

For larger tube end forming needs, see the A:801 I/O Sizer

See the A:680 — 8" hydraulic cylinder back-to-back with 6" cylinder for tubes up to 3" in diameter, especially for reductions requiring significant forming force.